Netfer Heroto-KA Heavy Cut Scratch Remover

This aggressive scratch remover compound, which we have produced as a result of our long-term R&D studies, removes clear coat scratches with its abrasive content.

Effectively removes deep scratches, blemishes and stubborn stains on the clear coat.

Netfer Heroto-KA Heavy Cut Scratch Remover Properties

• Removes P1000 grit and up.
• It contains no waxes, fillers or silicones and cleans up easily.
• Suitable for all paint finishes.
• Does not dry out quickly with water based formula.
• Works very well on all clear coats and paint finishes.
• High performance aggressive compound for maximum abrasion.
• Suitable for heavy defect removal.
• Delivers true paint correction.
• Works fast and leaves a medium-gloss finish.
• Silicone-free makes it safe for use in body shops and collision centers.
• Can be applied by hand, polisher or buffer.

Please note if you have very deep scratches which can be easily felt with the tip of your fingernail, this product may not help.

Cut Level 9/10

Gloss Level 7/10

Dust Level 3/10

How To Apply Netfer Heroto-KA Heavy Cut Scratch Remover

Shake product well before use. Always work on a clean, cool surface and in the shade.

Feel free to keep on non-painted rubber and vinyl surfaces, since it’s silicone-free, so easy to clean excess.

Wipe off excess with a microfiber towel, before product fully dries.

Repeat the same application until all defects are completely removed.

Follow with a less aggressive scratch remover like Netfer Heroto Medium Cut Scratch Remover or Netfer Heroto-75 Fine Cut Scratch Remover to clean the remaining lighter scratches and swirls.

Finish with Netfer Paroto as a quality wax, for more of that deep shine look and for tough long-lasting protection.

For more details with sample videos, visit Netfer Heroto-KA Heavy Cut Scratch Remover Application Guide page.

Application By Machine

For a faster and better performance, use with a wool cutting pad or heavy scratch removal polish pad.

Depending on the condition of the surface, apply between 1500 and 3500 rpm.

Use 5-6 drops Netfer Heroto-KA Heavy Cut Scratch Remover to work at 30-40 square centimeters area.

At the beginning buff using light pressure then slowly increase the pressure as having the best possible gloss finish.

Buff off while still moist. Do not let dry before and during the application.

Use clean, dry and soft microfiber cloth to wipe off excess.

Application By Hand

For a better performance, use with a clean cotton.

Miserly apply Netfer Hero-KA Heavy Cut Scratch Remover, 5-6 drops for 30-40 square centimeters area.

Apply with firm pressure and oval movements at right angle to the scratches.

Buff off while still moist. Do not let dry before and during the application.

Reapply if necessary then move to another section or to next application step.

Use clean, dry and soft microfiber cloth to wipe off excess.

Order Netfer Heroto-KA Heavy Cut Scratch Remover Online

It doesn’t matter where you live. You can order Netfer rubbing and polishing compounds worldwide.

Create your order now with discounted prices and free shipping advantages.

Your orders are sent from Netfer factory within a few days and are delivered by plane as soon as possible according to your country of residence.

Visit our Netfer Aliexpress Store now to follow the campaigns and create your order at affordable prices.

FAQ About Netfer Heroto-KA Heavy Cut Scratch Remover

We receive hundreds of questions from Netfer users. We post some of the most frequently asked questions and the short answers to be useful to other users.